It took two gallons of Pettit's Ultra SR60 to put one coat on the bottom, running gear and bow thruster, and two coats on the waterline. We even have a little left to put under the jack stands.
The 1/4 nap roller covers worked well. Once mixed the paint stayed mixed--they always warn about the copper falling to the bottom.
Weather permitting, tomorrow we'll get the last two gallons of paint on.
Wednesday, July 23, 2014
Tuesday, July 15, 2014
Bootstripe Day Two
After sanding with 320 grit we got the second coat on.
So much for a pint being able to do the bootstripe. The pint got us 1-1/2 times around. Looks like she'll need three and maybe four coats.
So much for a pint being able to do the bootstripe. The pint got us 1-1/2 times around. Looks like she'll need three and maybe four coats.
Monday, July 14, 2014
Bootstripe Beginngs
Started painting the 2-3/4" tall bootstripe today using Interlux white polyurethane. Interlux recommends sanding between coats with 220 grit. We used small foam rollers to apply the paint and then tipped it out with a paint brush. It's going to take at least three coats.
Saturday, July 12, 2014
Coat Five: It's a Wrap!
Yea, I know, the fifth coat was supposed to be white. Here's the story--it took 1-1/2 gallons to finish up today; one gallon of white and half a gallon of grey. Who said Interlux 2000E only comes in white and grey? It comes in light grey too ;-)
So here's what we learned after applying five coats of Interlux 2000E:
Walmart's 1/4" nap rollers work great
Mix only enough 2000E to do 1/2 the hull (about 1 gallon)
Lightly Sand the hull between coats
Alternate the color of each coat
Used new pans ($1 each at Dollar Tree), roller covers ($6 for 2 at Walmart) and brushes ($1 each at Dollar Tree) with each new load of 2000E
Put new tape along the waterline after each coat
Sand the the ridge smooth at the waterline after each coat.
So here's what we learned after applying five coats of Interlux 2000E:
Walmart's 1/4" nap rollers work great
Mix only enough 2000E to do 1/2 the hull (about 1 gallon)
Lightly Sand the hull between coats
Alternate the color of each coat
Used new pans ($1 each at Dollar Tree), roller covers ($6 for 2 at Walmart) and brushes ($1 each at Dollar Tree) with each new load of 2000E
Put new tape along the waterline after each coat
Sand the the ridge smooth at the waterline after each coat.
Friday, July 11, 2014
Coat four: Grey Day
An hour of sanding finished up the fairing job. We only used 1-1/2 gallons of Interlux 2000E today. The first three coats took 2 gallons each. Got a forth coat on the prop and the first coat on the bow thruster.
Removed the Vetus 95's zinc. That's something I wouldn't want to do in the water: two Phillips screws release the prop; push the prop's drive pin out of the shaft; then two Allen wrench screws release the zinc. That's a lot of little pieces to lose. The Zinc isn't too bad but does need to be replaced.
One layer of Interlux 2000E mic's out at 0.001" (I measured a layer which peeled off the plastic paint roller pan).
Removed the Vetus 95's zinc. That's something I wouldn't want to do in the water: two Phillips screws release the prop; push the prop's drive pin out of the shaft; then two Allen wrench screws release the zinc. That's a lot of little pieces to lose. The Zinc isn't too bad but does need to be replaced.
One layer of Interlux 2000E mic's out at 0.001" (I measured a layer which peeled off the plastic paint roller pan).
Wednesday, July 9, 2014
Pink Mostly Off
How hard can it be to remove Awlgrip's two-part filler? As it turns out, really hard. We spent 3-1/2 hours sanding away with 5" random orbital sanders using 80 grit and only got 3/4 of the hull done. John Niccolls, Knock Off #66, pointed out that the reason flat paint is so popular is that it doesn't show the voids in the underlying structure. The Interlux 2000E barrier coat is very shiny. Thus the more we put on, the more obvious the voids became. The good news is that ablative bottom paints aren't shiny! I've got to remember the mantra--better us the enemy of good enough.
The yard is moving Nellie to a new location so I asked them to reposition the stands and blocking. We'll be able to get the whole bottom barrier coated now. Cool.
The yard is moving Nellie to a new location so I asked them to reposition the stands and blocking. We'll be able to get the whole bottom barrier coated now. Cool.
Monday, July 7, 2014
Sanding and Pink On
I'm pleased the way we're able to feather multiple layers of Interlux 2000E together just below the top of the bootstripe. We've been careful not to touch (i.e. scratch) the green Awlcraft above the bootstripe. The successful feathering means the surface of the shiny, white bootstripe should look nice and smooth.
While we thought we'd be applying the forth layer of Interlux 2000E today, we didn't. We were both seeing a lot of sanding divots and thought it best to fill them. Thus it was another day of 'pink on'.
Subscribe to:
Posts (Atom)





