Coat four: Grey Day

An hour of sanding finished up the fairing job. We only used 1-1/2 gallons of Interlux 2000E today. The first three coats took 2 gallons each. Got a forth coat on the prop and the first coat on the bow thruster.

Removed the Vetus 95's zinc.  That's something I wouldn't want to do in the water: two Phillips screws release the prop; push the prop's drive pin out of the shaft; then two Allen wrench screws release the zinc.  That's a lot of little pieces to lose.  The Zinc isn't too bad but does need to be replaced.

One layer of Interlux 2000E mic's out at 0.001" (I measured a layer which peeled off the plastic paint roller pan).