Thursday, May 26, 2016

Whistles

Nellie's whistles were sounding anemic. The problem lay in the compressor's regulator.  Not enough air could get by it.  The drain valve was removed and replaced with a female air hose fitting.  The line supplying air to the whistle was then plugged into this unregulated port.  What a difference, the whistles now sound great.

Desperate Times...

This is either an act of lunacy or genius but it is driven by desperation. Either way I hope to solve the problem of the leaking coolant overflow bottle. Coolant has been escaping out of the cap's vent hole.  Try as I may I have been unable to stop it. Even reducing the bottle's water level to almost nothing hasn't helped. The engine's vibration, and subsequent coolant sloshing, is the source of the problem.   Hopefully the balls will contain all the fluid well below the cap's level.

Tuesday, May 24, 2016

Anchor Washdown Hose

Finding the right length hose for the anchor washdown bibb has always been problematic.  While in Ace Hardware the other day I found a good solution: individual, aluminum, hose fittings (shown above).  The hose, purchased separately (under $1/ft), can be any length you like.  In the future, when the hose needs to be replaced, the aluminum fittings can be reused.

Wednesday, April 27, 2016

Replacing Deck Caulk


Teakdecking Systems SIS-440

Dug out some failing seams, taped the edges, put in SIS-440, used a putty knife to level the surface, and removed the tape before the caulk setup.  Got a great result.  The SIS-440 set up fast, stuck well, and seems the perfect durometer for a deck joint--not too hard or too soft.  The color also matches the existing caulk.  It's also priced under $15/tube.  What's not to like?

I bought this tube last winter and it summered aboard in the southern Florida heat.  Amazingly, the tube was still good.  Clearly, shelf life isn't a big problem.

Monday, April 18, 2016

Hydraulic Steering Pump Leak

There has been a slow hydraulic oil leak from the steering shaft for a while.  I was unable to wiggle the wheel off.  A gear puller was needed. Replaced an o-ring around the shaft.  Yahoo, it worked.

Sunday, March 27, 2016

Class B AIS

Installed the West Marine AIS-1000 behind the Garmin 5212s. It's using the
Kenwood's antenna.

Monday, February 22, 2016

Voltage Regulator Grounding

Grounding the alternator's external voltage regulator to the engine block,
in lieu of the alternator's ground connection, is a more efficient way to
charge the batteries because it eliminates the problems associated with the
electrical resistance inherent in the mechanical connection between the
alternator and the engine block. Whew, that's a mouthfull ;-)

Here's a real-world example. With Nellie's engine running and the batteries
charging, the voltage between the battery's + and the alternator's ground,
aka the regulator's sense voltage, is 14.2V. However, the actual voltage
between the batteries + and - posts is 13.7V. Hmm, this is a problem. We
need the sense line to measure the battery's voltage, and it's not. The
voltage difference results in significant battery undercharging. By moving
the regulator's ground from the alternator to the block, the sense and
battery voltages will be the same.

Bottom line, I'm moving the voltage regulator's ground from the alternator
to the engine block.