Thursday, August 11, 2011
And More Cetol
First Cetol coat in pilothouse roof trim.
Friday, August 5, 2011
More Cetol and Mast Hardware Repositioning
The last coat of Cetol went on the mast today. Reinstalled the hardware. Moved the halyard's cleat to the starboard side of the mast. This will make it easier to lower and raise the mast as all the hardware to do so is now on the same side.
Thursday, August 4, 2011
More Cetol on Mast
Coat two of Cetol on mast.
Wednesday, August 3, 2011
Lots of Bungs Go Into the Mast
Removed all the mast's hardware and bunged the holes for the hardware not going back on. Sanded the mast back to bare wood. Put the first coat of Cetol on.
Friday, July 15, 2011
Pretty in Red
The freshly painted tiller went back in this morning with two new 3/8" stainless bolts. I'm glad I spent the time getting the tiller off because when Phil Jones' guys at the yard go to replace the rudder shaft's 3", packing gland, support hose, they won't have to spend a bunch of time breaking the tiller free—and it looks good in red ;-)

A freshly painted tiller.

A freshly painted tiller.
Thursday, July 14, 2011
Tiller Removal
Removed the tiller so the scale (rust) could be ground off and then repainted. Clearly it had been awhile since the tiller was last removed. One of the two stainless bolts refused to budge and so had to be cut off.
Tuesday, July 12, 2011
What Supports the Floor?
Got 60+ bungs into the mast. Amazing how many holes one sail track can create.
So, what does support the 13/16" thick floor boards? In a nutshell, floor joists. The joists are 2" thick by 1-3/4" wide. There's a stringer, fiberglassed into the hull, upon which the joists, running athwart, rest upon. The joists are fixed to the stringer by fiberglass.

Looking forward and outboard on the starboard side. The stainless water tank is forward.

Looking outboard at the floor support structure. Starting at the bottom are: (1) turn of the bilge for the fiberglass hull; (2) a stringer fiberglassed to the hull; (3) a floor joist that has been fiberglassed to both the stringer and the hull; and (4) a fixed portion of the floor.
So, what does support the 13/16" thick floor boards? In a nutshell, floor joists. The joists are 2" thick by 1-3/4" wide. There's a stringer, fiberglassed into the hull, upon which the joists, running athwart, rest upon. The joists are fixed to the stringer by fiberglass.

Looking forward and outboard on the starboard side. The stainless water tank is forward.

Looking outboard at the floor support structure. Starting at the bottom are: (1) turn of the bilge for the fiberglass hull; (2) a stringer fiberglassed to the hull; (3) a floor joist that has been fiberglassed to both the stringer and the hull; and (4) a fixed portion of the floor.
Subscribe to:
Posts (Atom)